Complete ready for connection and already mounted on a base plate.
Closed heating system, maintenance free, therefore particularly suitable for calcareous water (> 14° dH)!
Total weight approx. 30kg.
Connection cable 1,50 m (without plug) integrated 230 V heating element with a power of 3000 Watt. Incl. on / off control and safety temperature limiter.
Heating element control through recording of the return flow temperature.
Drinking water approved, high efficiency pump (max.45 Watt) Lower power consumption with the same pump power.
Control box with switch for summer and winter operation.
Summer operation = automatic short switching-on daily (1/2 hour) of the circulation pump, this prevents locking of the pump armature and -compared to previous pump controllers (permanent operation)- this saves energy costs considerably! The thermostat controlled heating unit is not in a heating mode.
Winter operation = permanent pump operation and electronic regulated heating.
Water return flow indicator light.
Acoustical and optical failure indication through a red warning light and a horn (92-96 dB).
Heating element without direct potable water contact!
No failure of the installation due to calcification of the heating element due to indirect warming of the potable water!
One-time filling of the heating system with water, this serves as transfer medium to the potable water.
No calcification of the spirals through which the potable water flows due to a temperature limitation at 35° C (+- 5K).
Accessories for the watering circuit (non-return valve, air relief valve, pressure relief valve and T-piece).
Residual current circuit breaker (30 mA) needs to be muss provided by the customer.
